Australian C-TICK Certification

C-tick certification mark is a sign that the electrical and electronic products comply with the standards and regulations of the electromagnetic interference in australia. On the product, use the C-tick flag usually to have the supplier's code (SCN) label. If the supplier is in New Zealand, in front of the supplier code to add the letter Z, if the supplier is in Australia, in front of the code and then add the letter N, to show the difference.

C-Tick authentication data preparation

1. to apply for certification of product manufacturers and the application of the full name of the certification and detailed contact address.

2. the user will provide a copy of the installation and use of certified products manual. If the product has no user manual, a copy of the relevant content can be provided.

3. product electrical schematic diagram and working principle.

4. the work of the relevant work frequency table, the table should be listed in the signal propagation path and the corresponding oscillation frequency.

5. some other features need to be explained.

Unless otherwise specified, the above information is available in english;

For a variety of plow number of product applications, please provide the information of each model;

If a series of product applications, please attach the different models of the similarities and differences between products.

C-Tick certification process

1. sample

2. product information

3. application form

4. contract

5. arrange the first paragraph

6. test

7. issue report

8. final payment

Authentication cycle

4-6 week